Company Details
  • Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd.

  •  [Shandong,China]
  • Business Type:Manufacturer , Service , Trade Company
  • Main Markets: Africa , Americas , Asia , Caribbean , East Europe , Europe , Middle East , North Europe , Oceania , Other Markets , West Europe , Worldwide
  • Exporter:21% - 30%
  • Certs:ISO14001, ISO9001, OHSAS18001, CCC, CE
Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd.
Title
  • Title
  • All
Product Categories
Online Service
http://www.sdjzcseriesdrumconcretemixer.comScan to visit
Home> Industry Information> Overall equipment maintenance system for commercial concrete mixing plant

Overall equipment maintenance system for commercial concrete mixing plant

July 02, 2020

Overall equipment maintenance system for commercial 

Concrete Mixing Plant

    The mixing station can operate well and is inseparable from its own maintenance. The equipment of the mixing station needs to be carefully guarded like a human to maximize the service life of the equipment and reduce the frequency of machine failures. After years of experience in technical research and development and after-sales service, the technicians of the workers summarized the maintenance and maintenance system for the equipment of the mixing station, and now share it with everyone!

(1) After each work is completed, the responsible personnel of the mixing station shall clean the maintenance items:
1 Clean the ash inside and outside of the mixing tank wall, the discharge port, the concrete residue on the mixing shaft and the discharge door. Rinse these places with water. If necessary, place a small amount of stone and water and let it stir for a few minutes. Clean cars, add-on tanks, and their systems with water.
2 During the freezing season, at the end of work, pumps, additive pumps, water tanks, additive tanks, residual water and additives in the water and additive pipeline shall be drained to prevent damage to the pump and its piping, and to start the additive to the pump. The pump runs for 1-2 minutes.
(2) The mixing station checks the maintenance items weekly:
1 whether the manual oil pump needs to be filled with grease;
2 Each lubrication point must be lubricated.
Note: Each lubrication point is located in the outlet shaft of the mixer, the storage hoppers and the weighing bucket shafts, belt conveyors, carrier rollers, rollers, rollers, bearings, drive chains, screw shafts, upper and lower bearings, and main gears. .
3 Check the wear of blades, scrapers, agitator arms, etc. If necessary, adjust the clearance or replace.
4 Check whether there is looseness in the connecting bolt of the vibrator;
5 Check the quality of the oil in the crankcase of the air compressor. Replace if necessary;
6 Check the contactor in the electrical appliance, whether the static contact of the middle relay is damaged or burned.

The above is the Overall equipment maintenance system for commercial concrete mixing plant we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Overall equipment maintenance system for commercial concrete mixing plant

Mobile Website Index. Sitemap


Subscribe To Our Newsletter:
Get Updates, Discounts, Special
Offers and Big Prizes!

Copyright © 2024 Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. All rights reserved.
Communicate with Supplier?Supplier
ZEYU Mr. ZEYU
What can I do for you?
Contact Supplier